The JN0-364 exam is the written test for Juniper's Service Provider Routing and Switching, Specialist certification (JNCIS-SP): 65 multiple-choice questions in 90 minutes, on Junos OS 25.2, with JNCIA-Junos as the prerequisite. If you already studied for JNCIS-ENT (JN0-352), most of it will look familiar. By our count, 42 of the 57 topics Juniper lists are ones the enterprise exam also lists, and the new ground is mostly MPLS, IPv6 and service provider Layer 2.
That overlap is the useful part, and it is missing from the practice-test listings that fill the search results. This note maps all ten JN0-364 objective areas, estimates how many questions each might carry, and sets JNCIS-SP next to JNCIS-ENT topic by topic. The facts come from Juniper's own pages, checked on 13 November 2026, and from the published JN0-364 exam syllabus.

What is the JN0-364 exam?
JN0-364 is the second step in Juniper's Service Provider Routing and Switching track, which runs JNCIA-Junos, JNCIS-SP, JNCIP-SP and JNCIE-SP. Juniper says the certification is meant for networking professionals with beginner to intermediate knowledge of routing and switching on Junos. The details below are from the JNCIS-SP certification page on Juniper's learning portal.
| Item | What Juniper says |
|---|---|
| Exam code | JN0-364 |
| Certification | Service Provider Routing and Switching, Specialist (JNCIS-SP) |
| Questions | 65, multiple choice |
| Time | 90 minutes |
| Prerequisite | JNCIA-Junos |
| Software version | Junos OS 25.2 |
| Delivery | Pearson VUE |
| Language | English only |
| Result | Pass or fail, shown right after the exam |
| Validity | Three years |
| Passing score | Not published |
| Section weights | Not published |
That works out to about 83 seconds a question. Juniper also says the questions are drawn from its recommended training: Junos Intermediate Routing (3 days), Junos Service Provider Switching (2 days) and Junos MPLS Fundamentals (3 days). Eight days of courses is a fair picture of the exam's depth. You don't have to take them, but a topic that goes far past those courses is unlikely to show up.
Which ten areas does JN0-364 cover, and how many questions might each get?
Juniper lists ten objective areas. Each one has an "identify" line with named topics, and a second line asking you to configure, monitor or troubleshoot. Across the ten areas there are 57 named topics in the identify lines. Juniper gives no weights, so the question counts below are our estimate: each area's share of the 57 topics, applied to 65 questions and rounded so the total is 65. Treat them as a guide to effort, not a promise about your exam form.
| Objective area | Topics listed | Estimated questions |
|---|---|---|
| Protocol-independent routing | 5 | about 6 |
| OSPF | 7 | about 8 |
| IS-IS | 7 | about 8 |
| BGP | 5 | about 6 |
| Layer 2 bridging or VLANs | 8 | about 9 |
| Spanning-tree protocols | 5 | about 6 |
| MPLS | 8 | about 9 |
| IPv6 | 3 | about 3 |
| Tunnels | 2 | about 2 |
| High availability | 7 | about 8 |
| Total | 57 | 65 |
Two things stand out. First, the four routing protocol areas (protocol-independent routing, OSPF, IS-IS and BGP) carry roughly 28 questions between them, close to half the exam. Second, MPLS and Layer 2 bridging are the two biggest single areas. Those are also the areas where the service provider angle is strongest, so they reward lab time on a router running Junos, not only reading.
How does JN0-364 compare with JN0-352 (JNCIS-ENT)?
Both exams sit at the specialist level, both need JNCIA-Junos first, and both are 65 questions in 90 minutes. The difference is the network they assume: an enterprise campus with switches for JNCIS-ENT, a provider core and edge for JNCIS-SP. We wrote about the enterprise exam earlier in our note on the JN0-352 courses and Junos releases, and this table puts the two side by side.
| Point | JN0-364 (JNCIS-SP) | JN0-352 (JNCIS-ENT) |
|---|---|---|
| Track | Service Provider Routing and Switching | Enterprise Routing and Switching |
| Prerequisite | JNCIA-Junos | JNCIA-Junos |
| Questions and time | 65 in 90 minutes | 65 in 90 minutes |
| Software version | Junos OS 25.2 | Junos 23.1 |
| Objective areas | 10 | 9 |
| Areas only on this exam | MPLS, IPv6 | Layer 2 Security |
| Recommended courses | Intermediate Routing, Service Provider Switching, MPLS Fundamentals (8 days) | Intermediate Routing, Enterprise Switching (5 days) |
| Next level | JNCIP-SP (JN0-664) | JNCIP-ENT |
The shared course is the key. Junos Intermediate Routing is on both recommended lists, and it covers protocol-independent routing, OSPF, IS-IS, BGP, routing policy, tunnels, load balancing, high availability and IPv6. That one course explains most of the overlap. You can check the enterprise exam's own list on the JNCIS-ENT certification page.
Which JN0-364 topics are new if you already know JNCIS-ENT?
We went through the 57 topics one by one and checked each against the JNCIS-ENT list. Protocol-independent routing, OSPF, IS-IS and BGP match topic for topic. Tunnels match too (the enterprise exam adds IP-IP), and so do all seven high availability topics: LAG, graceful restart, GRES, nonstop bridging, nonstop active routing, BFD and VRRP. That leaves 15 topics that are new for someone coming from the enterprise side:
- MPLS, all 8 topics: terminology, the packet header, end-to-end packet flow, labels and the label information base, MPLS and routing tables, RSVP, LDP, and segment routing with MPLS. The configure line asks for RSVP-signalled and LDP-signalled LSPs and shortest-path segment-routing LSPs.
- IPv6, all 3 topics: static routes, dynamic routing with OSPFv3, IS-IS and BGP, and IPv6 over IPv4 tunnelling.
- Service provider Layer 2, 3 topics: service provider switching platforms, virtual switches, and provider bridging (Q-in-Q tunnelling).
- Spanning tree, 1 topic: the concepts line adds MSTP and VSTP to the STP and RSTP you already know.
Using the same scaling as the table above, those 15 topics are worth about 17 of the 65 questions. The other 48 or so rest on topics the enterprise exam also lists. That doesn't mean they are free marks. The provider exam asks about them on routers rather than campus switches, and IRB, the way Junos routes between VLANs, is named here where the enterprise list says inter-VLAN routing. Still, the study plan changes a lot when about a quarter of the content is new rather than all of it.

It also works the other way. A candidate who starts with JNCIS-SP and later sits JNCIS-ENT will meet Layer 2 Security (port security, DHCP snooping, dynamic ARP inspection, MACsec, storm control and Layer 2 firewall filters), plus redundant trunk groups, virtual chassis and unified ISSU, none of which JN0-364 lists.
How should you split your study time?
Juniper publishes no study-hour figure, so this is a suggestion built from the topic counts. Plan in two blocks, and size them by where you start.
| Block | Areas | Coming from JNCIA-Junos only | Coming from JNCIS-ENT |
|---|---|---|---|
| Routing core | Protocol-independent routing, OSPF, IS-IS, BGP | Full study and labs | Review only, with policy and IS-IS levels in a lab |
| Provider Layer 2 | Bridging and VLANs, spanning tree | Full study | Virtual switches, Q-in-Q, MSTP and VSTP |
| MPLS | All 8 topics | Full study and labs | Full study and labs |
| IPv6 and tunnels | IPv6, GRE | Full study | IPv6 in full, GRE as review |
| High availability | LAG, GR, GRES, NSB, NSR, BFD, VRRP | Full study | Review only |
For an enterprise-certified engineer, the single best use of time is MPLS. It is about 9 questions on its own, it is wholly new, and RSVP and LDP are easier to learn by building LSPs in a lab than by reading about them. Put IPv6 next, since its three topics ride on OSPF, IS-IS and BGP, which you already know. Leave the shared areas for the final week as review.
Does passing JN0-364 renew JNCIS-ENT?
No. Juniper's recertification rules say that passing an exam or taking a course at a higher level renews all lower-level active certifications in the same track, plus all other active associate-level certifications. Every certification stays active for three years, and one that expires can't be renewed from its current level.
So passing JN0-364 renews your JNCIA-Junos, which sits below it in the same track. It does not renew JNCIS-ENT, which is at the same level in a different track. If you hold both specialist certifications, each needs its own renewal before its three years run out. The next step on the provider side is the JNCIP-SP certification, exam JN0-664, which needs JNCIS-SP first. Passing it would renew JNCIS-SP as well.
What does JN0-364 cost, and how do you book it?
The exam is bought as a Pearson VUE voucher. The Pearson VUE voucher store for Juniper in the USA lists the JNCIS/JNCDS voucher at US$300, between the associate voucher at $200 and the professional voucher at $400. Prices can differ by country, so check the store for yours.
Juniper's program now carries a new name. Pearson VUE's Juniper Networks testing page says the Juniper Networks Certification Program has been renamed the HPE Networking Certification Program, and that you schedule, manage and launch proctored written exams through Alpine CertMetrics with your hpe.com login. Online proctoring through OnVUE is offered as well as test centres.
Watch: a short video on the JNCIS-SP exam
This video from our channel covers JN0-363, the previous JNCIS-SP exam. Our channel has no JN0-364 video yet, so this is the closest match. The track and most of the routing topics carry over. Check the current objective list above for the MPLS and segment routing details.
Frequently asked questions
1. Can I take JN0-364 right after JNCIA-Junos?
Yes. JNCIA-Junos is the only prerequisite Juniper lists for JNCIS-SP. You don't need JNCIS-ENT first.
2. How much of JN0-364 is MPLS?
MPLS is one of ten areas and lists 8 of the 57 named topics. By our estimate that is about 9 of the 65 questions. Juniper publishes no section weights.
3. Which Junos version should I lab on for JN0-364?
Juniper lists Junos OS 25.2 for the exam. The recommended Junos Intermediate Routing and Service Provider Switching courses are also built on Junos OS 25.2.
4. Is JNCIS-SP harder than JNCIS-ENT?
The format is the same, 65 questions in 90 minutes. The difference is content: JNCIS-SP adds MPLS and IPv6, while JNCIS-ENT has Layer 2 Security. Which feels harder depends on whether you work on provider routers or campus switches.
5. Does the exam give a score breakdown?
No. Juniper shows pass or fail right after the exam and publishes no passing score.
Written by the team behind NWExam.





