
If you are searching for a JNCIS-ENT book, the short answer is that Juniper does not name one. The official page for the JN0-352 exam lists two courses as recommended training, Junos Intermediate Routing and Junos Enterprise Switching, and says the exam questions are derived from that training and the listed exam resources.
That changes how you should prepare. Instead of hunting for a single textbook, you can split the nine exam objectives between the two courses, read each course outline as a chapter list, and fill the gaps with the Junos documentation and lab time. This guide does that split. Every fact below was checked on 14 October 2026 on the HPE Juniper Networking learning portal and on Pearson VUE.
What are the JN0-352 exam facts?
The JNCIS-ENT certification page gives the format:
- Exam: Enterprise Routing and Switching, Specialist (JNCIS-ENT), code JN0-352
- Questions: 65 multiple-choice
- Time: 90 minutes
- Software version: Junos 23.1
- Prerequisite: JNCIA-Junos
- Language: English only
- Delivery: Pearson VUE
- Result: pass or fail, shown right after the exam
- Validity: three years
Juniper does not publish a passing score for JN0-352, and the fee is not on the certification page either. Sixty-five questions in 90 minutes gives you about 83 seconds a question.
For the price, the Pearson VUE voucher store for Juniper exams in the US lists the JNCIS/JNCDS exam voucher at $300.
Is there an official JNCIS-ENT book?
No. The certification page lists recommended training, practice exams, exam prep webinars and additional resources, and no book. Juniper's own wording is clear about where the questions come from: "Exam questions are derived from the recommended training and the exam resources listed above."
The same page adds that these resources "aren't required, and using them doesn't guarantee you'll pass the exam." So the two courses are the closest thing to an official book, not a promise. Juniper also runs a free 90-minute Open Learning webinar on the JNCIS-ENT exam, and its page says plainly that the exam "is based on" the two courses. The next session listed is on January 26, 2027.
What does Junos Enterprise Switching cover?
Junos Enterprise Switching (JEX) is a two-day, instructor-led course with labs and an eBook, also offered on demand. Its outline covers switching concepts and operations, VLANs, the Rapid Spanning Tree Protocol, port and device security features, and high availability features. The labs use EX4300-24T switches, and the course is based on Junos OS Release 21.4R3.
On the exam side, JEX lines up with the first three objectives:
- Layer 2 Switching or VLANs: bridging components, frame processing, ports, tagging, native and voice VLANs, inter-VLAN routing
- Spanning Tree: STP and RSTP concepts, port roles and states, BPDUs, convergence and reconvergence
- Layer 2 Security: BPDU, loop and root protection, port security (MAC limiting, DHCP snooping, dynamic ARP inspection, IP source guard), MACsec, storm control and Layer 2 firewall filters
By our count of the topic items Juniper prints under each objective, these three hold 26 of the 88 items.
What does Junos Intermediate Routing cover?
Junos Intermediate Routing (JIR) is the longer course: three days, instructor-led, with labs and an eBook, plus an on-demand version. Its outline lists protocol-independent routing features, OSPF, IS-IS, BGP, routing policy, IP tunneling, load balancing, high availability features, VRRP and IPv6. The labs run on vSRX Series Services Gateways, and the course is based on Junos OS Release 25.2R1.
JIR lines up with five objectives:
- Protocol Independent Routing: static, aggregate and generated routes, martian addresses, routing instances and RIB groups, load balancing, filter-based forwarding
- OSPF: the link-state database, packet types, router ID, adjacencies, DR and BDR, area and router types, realms, LSA types
- IS-IS: the link-state database, PDUs, TLVs, adjacencies, levels and areas, the DIS, metrics
- BGP: basic operation, message types, attributes, the route selection process, IBGP and EBGP
- Tunnels: tunneling applications, GRE and IP-IP
Those five objectives hold 46 of the 88 items, more than half. If your background is mostly campus switching, this is where most of your reading time goes.
The same course is on the service provider list too, so if you are weighing the other specialist exam, our comparison of JN0-364 (JNCIS-SP) with JN0-352 counts which topics the two specialist exams share and which are new.

Where does High Availability fit?
High Availability is the largest single objective, with 16 items, and both course outlines mention high availability features. The exam list mixes switching and routing features: link aggregation groups, redundant trunk groups, Virtual Chassis and nonstop bridging on one side, and graceful restart, GRES, nonstop active routing, BFD, VRRP and unified ISSU on the other.
Juniper does not say which course teaches which item. A sensible reading is to study LAG, RTG, Virtual Chassis and NSB with your switching notes and the rest with your routing notes, then review the whole objective as one block at the end. That split is our interpretation, not Juniper's.
Why do the Junos versions differ?
Here is the detail most reading lists miss. The exam is written against Junos 23.1. JEX is based on Junos OS 21.4R3, and JIR on Junos OS 25.2R1. Neither course matches the exam release.
For most objectives this matters little, because OSPF adjacencies or RSTP port roles do not change between releases. It matters more for command output and default values. When a lab result differs from your course notes, check the Junos 23.1 documentation for that feature before you memorize either answer. Also note that JIR covers IPv6, which the JN0-352 objectives do not name, so treat it as background reading.
Which topics repeat across the objectives?
Two items show up again and again in the objective list, and they make good daily drills:
- Troubleshooting tools (ping, traceroute, traceoptions, show commands and logging) appear in five objectives: OSPF, IS-IS, BGP, Tunnels and High Availability.
- Routing policy application appears in three: OSPF, IS-IS and BGP.
If you learn one traceoptions setup and one export policy well, you reuse them in every protocol lab.
Juniper prints no percentage next to any of the nine objectives, so item counts like ours are the nearest thing to a weighting. For a closer reading of how each objective is worded, see this earlier walk through the nine JN0-352 objectives.
The JN0-352 syllabus on NWExam prints the same nine objectives on one page, which works as a tick list while you move through both courses.
Which video gives a quick overview?
NWExam's YouTube channel has no JN0-352 video yet. This short one covers JN0-351, the previous JNCIS-ENT exam code, so use it for the format and question style and check every topic against the current objective list:
How should you test yourself?
Juniper's official JNCIS-ENT practice exam shows the correct answers with explanations at the end. Its pass mark is set to 70%, which Juniper says is not necessarily the passing score of the live exam. You get unlimited attempts, but the questions do not change, so a second run measures memory more than skill. Use it once early to find weak objectives, and once near the end.
In between, write your own questions as you finish each lab. Take one item from the objective list, such as BGP attributes or storm control, and turn it into a four-option question with one right answer and three answers that are almost right. Writing the wrong options is where most of the learning happens.
Close to exam day, time yourself. Sixty-five questions in 90 minutes is about 83 seconds each, so practise a full set of mixed questions in one sitting and note which objectives slow you down. Those are the ones that still need lab time.
What changed in booking with the move to HPE?
Pearson VUE's HPE Networking Certification page says that as of September 15, 2026 the Juniper Networks Certification Program is renamed the HPE Networking Certification Program. You now sign in to Alpine CertMetrics with an hpe.com username and password, and you schedule, manage and launch proctored written exams there. If you set up your certification account years ago for JNCIA-Junos, sort out that login before you pick an exam date.
Frequently asked questions
1. Is there an official JNCIS-ENT book for JN0-352?
No. Juniper's certification page lists two recommended courses, Junos Intermediate Routing and Junos Enterprise Switching, plus practice exams and prep webinars. It says the exam questions are derived from the recommended training and those resources.
2. How many questions are on JN0-352, and how long is the exam?
JN0-352 has 65 multiple-choice questions and a 90-minute time limit. It is delivered by Pearson VUE in English only, and the pass or fail result appears right after the exam.
3. What is the passing score for JN0-352?
Juniper does not publish one. The official practice exam uses a 70% pass mark, but Juniper states that this is not necessarily the passing score of the live exam.
4. How much does the JNCIS-ENT exam cost?
Pearson VUE's US voucher store lists the Juniper Networks JNCIS/JNCDS exam voucher at $300. That is the US store price, so check the voucher store for your own region before you buy.
5. Do I need JNCIA-Junos first, and how long does JNCIS-ENT last?
Yes, JNCIA-Junos is the prerequisite. JNCIS-ENT stays active for three years. You can renew it by passing the exam again or a higher-level exam in the track, or by course attendance, and both JIR and JEX are listed as valid towards renewing it. Juniper's recertification options page has the rules.
Written by the team behind NWExam.
No comments:
Post a Comment